GT2 Timing Belt 1164mm x 6mm Experiment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This little experiment was because I needed a 1164mm timing belt for a camera slider project. The belt is on order but…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This little experiment was because I needed a 1164mm timing belt for a camera slider project. The belt is on order but is going to take about a week to get here so I designed a quick one to print so I can get this project going ASAP.
I printed it off in Ninjaflex it took about 3 hours on the Taz6, and so far it works pretty good.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Notes:
Print this in Ninjaflex or Semiflex
How I Designed This
OnShape link:
https://cad.onshape.com/documents/7089870465b1c9d0a99abbda/w/662b4546814116a86515d4a8/e/4b813f4befde231507dcb67brnrnI made a 1164mm contour that would fit my bed and then repeated the GT2 belt pattern.
Category: 3D Printer Parts