1 / 2
Pot Lid Rails - Store Saucepan Lids on a Cupboard Door or Wall, Set of 3, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Pot Lid Rails - Store Saucepan Lids on a Cupboard Door or Wall, Set of 3, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rails with a lipped ledge that hold saucepan lids flat against the inside of a cupboard door or the wall. Screw or tape

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Store saucepan lids flat against the inside of a cupboard door or on the wall, instead of rattling around in a drawer. Each rail has a ledge with a raised front lip: the lid's rim sits on the ledge and the lid leans back against the door. Three rails, one per lid. Screw them on through the countersunk holes or use strong mounting tape.

DETAILS

• 180 x 30 mm rails, 22 mm ledge with a 6 mm lip.

• Prints flat with no supports: the ledge stands straight up and its lip is a 45-degree wedge.

• Bambu Studio: 2 h 33, 89 g for all 3.

CUSTOMIZE (OpenSCAD)

Rail length, ledge depth and number of rails.

Tagi