1 / 2
Drawer Pull Handles - 96, 128 and 160 mm Bar Handles for Drawers and Cupboards, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Drawer Pull Handles - 96, 128 and 160 mm Bar Handles for Drawers and Cupboards, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bar handles for drawers, cupboards and wardrobes in the three standard hole spacings, fixed with M4 screws.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bar handles for drawers, kitchen cupboards and wardrobes in the three standard hole spacings, 96, 128 and 160 mm, to replace a broken one or give old furniture a new look. Print a whole set in a colour to match the room. Fix them from inside the drawer with M4 screws, which cut their own thread into the plastic.

DETAILS

• 30 mm deep (finger room), 12 mm wide bar, 3.3 mm pilot holes.

• Prints on its side with no supports, which also makes it strongest; the screw holes are teardrop-shaped.

• Bambu Studio: 1 h 2, 32 g for all 3.

CUSTOMIZE (OpenSCAD)

Hole spacings, depth and bar width.

Tagi