1 / 2
Pot Rim Spoon Rest - Clip-On Holder that Keeps Drips in the Pan, 3 Rim Sizes, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Pot Rim Spoon Rest - Clip-On Holder that Keeps Drips in the Pan, 3 Rim Sizes, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clips onto the rim of a saucepan or stockpot and holds your spoon or ladle handle, so drips go back in the pan.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Clips onto the rim of a saucepan, stockpot or slow cooker and holds the handle of your wooden spoon or ladle in a cradle inside the pan, so the drips go back into the pot instead of onto the hob, and the spoon doesn't slide in. Three clips for thin, medium and thick pan rims.

DETAILS

• For 2, 3.5 and 5 mm pan rims, 24 mm wide, 16 mm handle cradle.

• Prints on its side with no supports. Use PETG (it copes with steam) and keep it away from the flame or hot plate.

• Bambu Studio: 41 min, 18 g for all 3.

CUSTOMIZE (OpenSCAD)

Rim thicknesses, clip width and cradle width.

Tagi