1 / 2
Mini Golf Set - Putting Hole with Flag, Jump Ramp and Arch Gate for a Crazy Golf Course, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Mini Golf Set - Putting Hole with Flag, Jump Ramp and Arch Gate for a Crazy Golf Course, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Build a crazy golf course in the garden, hall or office: a putting hole with a flag, a jump ramp and an arch gate.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Make a crazy golf course in the garden, the hall or the office: a putting hole with a flag (use a skewer or a pencil as the pole), a jump ramp with side rails and an arch gate to putt through. Fits a standard golf ball or any ball up to 50 mm. Print a few sets and build a whole course.

DETAILS

• 120 mm putting ring with a 55 mm hole, 80 x 90 mm ramp rising to 22 mm, 106 mm wide gate.

• Prints flat with no supports. The gate is printed lying down and stands on its wide feet.

• Bambu Studio: 2 h 35, 84 g for the set.

CUSTOMIZE (OpenSCAD)

Ball size and flag pole size.

Tagi