1 / 2
Burger Press - Ring and Plunger for Even Home-Made Burgers, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Burger Press - Ring and Plunger for Even Home-Made Burgers, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Make neat, even burgers the same size every time: fill the ring with mince and press it flat with the plunger.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Make neat, even home-made burgers the same size every time: put the ring on a square of baking paper, fill it with mince and press it flat with the plunger, then lift the ring off. Handles on the ring and a tall knob on the plunger keep your hands clean. Also good for rice cakes, fish cakes and food stacks.

DETAILS

• 100 mm burgers, 18 mm deep ring.

• Prints with no supports: the ring prints flat with its handles, and the plunger's knob stands straight up. Use a food-safe filament and wash by hand.

• Bambu Studio: 1 h 28, 47 g for both parts.

CUSTOMIZE (OpenSCAD)

Burger diameter and thickness.

Tagi