1 / 2
Pencil Extenders - Use Pencils and Crayons to the Last Stub, 3 Sizes, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Pencil Extenders - Use Pencils and Crayons to the Last Stub, 3 Sizes, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Push a pencil stub into the split collet and keep drawing: three extenders for standard, thick and chunky pencils.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Use colouring pencils, graphite pencils and crayons right down to the last few centimetres instead of throwing the stubs away: push the stub into the split collet and it grips. Three extenders, for standard pencils, thick pencils and chunky crayons. Good for artists, schools and anyone who hates waste.

DETAILS

• 100 mm long, for 7.4, 8.4 and 10 mm pencils.

• Prints upright with no supports: a straight tube.

• Bambu Studio: 1 h 30, 25 g for all 3.

CUSTOMIZE (OpenSCAD)

Pencil sizes and length.

Tagi