Mini Bowling Set - 10 Skittles and a Ball for Table-Top Bowling, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ten skittles and a ball for table-top or hallway bowling, with weighted bases that topple satisfyingly.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ten skittles and a ball for table-top or hallway bowling: set the pins up in a triangle and roll. The pins have a proper skittle shape with a wide base so they stand well but still topple satisfyingly, and the ball prints as two halves that push together on a printed peg (a dab of glue makes it permanent). Print the pins in white with a coloured stripe by changing filament at the neck.
DETAILS
• 72 mm pins, 40 mm ball.
• Prints with no supports: the pins stand upright with gentle curves, and the ball halves print flat side down.
• Bambu Studio: 2 h 38, 83 g for the set.
CUSTOMIZE (OpenSCAD)
Pin height and ball diameter.