Under-Shelf Wine Glass Rack - Hang Stemmed Glasses Under a Shelf or Cupboard, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screws under a shelf or cupboard and holds stemmed glasses upside down by their feet, out of the way.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Screws under a kitchen shelf, bar shelf or cupboard and holds stemmed wine, gin and cocktail glasses upside down by their feet, so they hang out of the way, drain and stay dust-free. Slide the glasses in from the open end; fit several racks side by side for more rows. Two screws go through the middle, and the heads sit in the stem gap.
DETAILS
• 180 mm long, 88 mm wide, for stems up to 14 mm and feet up to about 80 mm.
• Prints standing on end with no supports: the profile is a straight extrusion, and the screw holes are teardrop-shaped.
• Bambu Studio: 2 h 42, 82 g.
CUSTOMIZE (OpenSCAD)
Length, stem gap and foot slot height.