Pwnagotchi Cover (UPS-Lite V1.2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen: Waveshare V4 Epaper Hat (2.13 inch) Battery: UPS-Lite V1.2 Mainboard: Raspberry Pi Zero W
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Printed with PLA, the holes might not be aligned perfectly because the goal here was not making an "all-in-one" product, however, its still better than having no case at all because this will protect your device from dust and anything that could damage the circuit (except from water, this isn't waterproof), also don't rip of the outer shell with force because it was made to be a very tight fit but based on my experience it will expand over time and it will be easier to take off . Hope this design helps you, I made this because it felt uncomfortable to carry my Pwnagotchi without any mechanical protection. Designed in FreeCAD.
Original Pwnagotchi forum: https://pwnagotchi.ai/
Unofficial community maintained pwnagotchi forum: https://pwnagotchi.org/
Buy the UPS-Lite here: https://spotpear.com/shop/Raspberry-Pi-Zero-UPS-Lite-MAX17040-I2C-Read-Power.html