1 / 2
Under-Shelf Mug Hooks - Clip-On Hooks for Mugs and Cups, No Screws, Set of 2 (OpenSCAD) — zdjęcie 1
1 / 2

Under-Shelf Mug Hooks - Clip-On Hooks for Mugs and Cups, No Screws, Set of 2 (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clips that slide onto the front of a shelf with two hooks underneath for mugs, cups or tea towels.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Clips that slide onto the front of a kitchen shelf or cupboard shelf, with two hooks underneath to hang mugs, cups, utensils or tea towels. No screws or drilling: set the shelf thickness in the Customizer for a snug fit. Two clips (four hooks) on the plate.

DETAILS

• For 18 mm shelves as set, 20 mm wide, reaching 45 mm under the shelf.

• Prints on its side with no supports: the profile is a flat extrusion.

• Bambu Studio: 54 min, 26 g for both.

CUSTOMIZE (OpenSCAD)

Shelf thickness, clip width and reach.

Tagi