1 / 2
Kickstand Puck - Side Stand Pad for Motorbikes and Scooters on Soft Ground, No Supports (OpenSCAD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pad for under a motorbike or scooter side stand so it doesn't sink into hot tarmac, grass or gravel.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pad that goes under a motorbike, scooter or bicycle side stand so it doesn't sink into soft tarmac on a hot day, grass, gravel or a campsite. The stand's foot sits in a shallow cup so it can't slide off, and a lanyard loop lets you pick it up from the saddle with a cord. Print in PETG or ASA.
DETAILS
• 90 mm across, 9 mm thick, with a 45 mm cup.
• Prints flat with no supports.
• Bambu Studio: 42 min, 24 g.
CUSTOMIZE (OpenSCAD)
Diameter, thickness and cup size.