Wall playground for cats (cat not included)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Building instructions and printable anchors for a wall-mounted cat playground
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Materials:
Fabric: Felt, approx. 3mm thickness
use metal eyelet for mounting it to the wooden pieces to make it last longer
Metal wall hangers: ~300mm x 250mm (horizontal x vertical), width ~45mm
Use strong wall anchors for drywall!
Connections to the wooden parts:
3x20 mm wood screws
Wooden parts:
19x46x250 mm (thickness x width x length)
any cheap soft wood will do
Printed attachments:
Use larger symmetrical part for open walls
Use smaller asymmetrical part for corners or avoiding electrical wiring / plumbing in the walls
Printing:
Material: any (I used elegoo PLA+, and it turned out super sturdy)
0.6 mm nozzle
0.25mm layers
Walls: 2 + alternating extra wall
Outer: 0.6mm
Inner: 0.8mm
Infill: 15% triangles
Top/Bottom
5 layers
0,75 mm
No supports
Skirt: 1 line (like to add this to get rid of nozzle goo...)
Print Profile (Orca Slicer)
see attached zip-file