Jam Jar Funnel - Wide-Mouth Funnel for Jam, Chutney and Pickles, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wide-mouth funnel that sits in a jam jar so you can fill it without coating the rim.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A wide-mouth funnel that sits in the top of a jam jar so you can ladle in jam, chutney, pickles, soup, lentils, rice or flour without coating the rim. The short wide spout drops inside the jar and the cone rests on the rim. A tab on the edge hangs it on a hook. A wide companion to the Funnel Set. Use a food-safe filament, and keep very hot jam away from PLA (PETG copes better).
DETAILS
• 140 mm wide at the top, 56 mm spout for standard jam jars.
• Prints with no supports: spout down, with a cone that leans out under 40 degrees and a 45-degree rolled rim.
• Bambu Studio: 1 h 46, 49 g.
CUSTOMIZE (OpenSCAD)
Spout diameter, top diameter and spout length.