Logo Jellyfin Dell Optiplex micro Multicolor with Prusa Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A geek friend asked for one so there it is.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If it's the first time you will print multicolor part with your Prusa Mini, take the time to read and enjoy.
First, simply open the 3mf file, adjust your filament choice if needed, and slice it. The 3mf file is configured to mimic a printer with several extruders. As a result, your printer will go home for a filament change when required.
I adjusted the temperature of my PETG filament at the lowest level to avoid angel hair and after the third layer I manually increased the temperature.
The method is simple, think about transforming yoursefl into MMU device, and allow some time to do it.
If you want same result than me follow this order to change filaments:
Firts layer: Blue - Black
Second layer: Blue
Third layer: Black
After that wait until the end and that's all.
Congrats, You made a multicolor print with a Prusa Mini.
Enjoy and never stop printing!