Mylar Bag Funnel - Pint, Freeze Dried Food
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wide funnel that drops right into pint-size mylar bags for mess-free filling of freeze-dried food.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a freeze dryer, you know filling mylar bags is a pain. The bags flop over, the openings are narrow, and you end up with crumbs all over the counter (and in the seal area, which messes up your seal).
This funnel has a wide top to catch everything and a long spout sized for pint mylar bags. The spout slides into the bag and holds it open while you fill, and the wide brim sits on top of the bag so it stays put. It keeps the seal area clean so you get a good heat seal every time.
Parts
None
Assembly
None
Attributions
None, my original design.
Joke of the Design
Just a quick original joke to celebrate the posting of this new design (it helps if you have low expectations):
"Every time I want to stay home sick from work, I just eat Taco Bell."
Now pick yourself up off the floor and GET PRINTING!
Print Settings
Rafts: No
Supports: No (print brim side down)
Layer height: 0.2 mm
Infill: 15%
Material: PLA or PETG (PETG if you want it food-contact friendly; see note)
Notes: For anything that touches food, use a food-safe filament and wash it well. Layer lines can trap food particles.