3D Tic Tac Toe - Three-Level 3 x 3 x 3 Noughts and Crosses, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Noughts and crosses on three stacked levels: get three in a row on a level, down through the levels or diagonally.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Noughts and crosses on three levels: a 3 x 3 x 3 cube of pockets, stacked on four posts. Get three in a row on any level, straight down through the levels, or diagonally through the cube. Much harder than flat noughts and crosses! Three level boards, four push-fit posts, 14 crosses and 14 noughts. A 3D spin on the Pocket Tic Tac Toe.
DETAILS
• 78 mm levels, 28 mm apart.
• Prints flat with no supports: the boards, posts (lying down) and pieces all print flat; push the posts through the corner holes and the collars hold each level at the right height.
• Bambu Studio: 2 h 27, 69 g for the set.
CUSTOMIZE (OpenSCAD)
Pocket spacing and level height.