HDzero goggles 1/2 TrueRC X-AIR 5.8 MK II antenna mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TrueRC X-AIR 5.8 MK II mount for HDZ goggles 1/2 with reduced coax cable strain for both top and side SMA connectors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I keep on seeing people mounting TrueRC X-AIR 5.8 MK II's on their HDZ goggles using mounts that push the cable on the antennas to the absolute limit, especially when trying to use them with the top left SMA connector for analog on the G2s, so I made these.
FEATURES:
2 versions for coax connection on top/side
The antennas are angled by 7.5 degrees to reduce the strain on the cables on both the side and top mounted version.
very light weight (~4g per bracket)
low profile
easy assembly and installation
I tried to follow the contours of the goggles as closely as possible so the brackets seamlessly blend into the shape of goggles.
PRINT SETTINGS:
PLA+ with 0.6mm nozzle at 0.25mm layers, but any setting should probably work, just make sure to enable supports on build plate only (I recommend organic here) and print in this orientation:

ASSEMBLY:
Cut out a 35*35*3mm ~ish square of foam and put it on the backside of the antenna... that's it.
I used a piece of foam from some old packaging I had lying around, I'm sure you'll find some too.
A little something like this:

WARNING!!!
Every printer has different tolerances, if the bracket doesn't slide on easily, file a bit of the lip on the bracket off. If you force it you'll scratch off the paint on the rails. Sure, the bracket covers most of it, but it is still a shame, don't be stupid like I was...
PS - If you don't like the look of these, I recommend this set: https://www.printables.com/model/1082905-hdzero-truerc-x-air-brackets-and-thumbscrews-by-fo by Fourflies, they look great!
happy flying :3
v.1.0