Drink Can Lids - Snap-On Lettered Lids for Standard Cans, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on lids for standard drinks cans: keep the fizz in and the wasps out, with a letter so everyone knows whose is whos
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snap-on lids for standard 330 ml and 440 ml drinks cans: keep the fizz in, and the wasps and the dust out, at a barbecue, a picnic or on the desk. Each lid has a different letter so everyone knows whose drink is whose. Check the fit on your cans and adjust the rim diameter if needed.
DETAILS
• Four lids with a 55.2 mm skirt and a grip tab.
• Prints with no supports: each lid prints upside down (top on the bed) with a 45-degree catch lip inside the skirt, and the letter engraved in the top.
• Bambu Studio: 57 min, 31 g for the set.
CUSTOMIZE (OpenSCAD)
Rim diameter and the four letters.