1 / 2
Betastick or clipstick hanger for outside of backpack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conveniently carry your clipstick to the crag.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A holder to attach your clipstick/Betastick on the outside of your backpack. I made a version with an open side to slide over a strap and a closed version that the strap goes through. The opening of the closed version is 23mm by 3mm. In my experience the open version sometimes get knocked of the strap, but it worked great for others.
I printed it in PLA 15% infill, but you can make it stronger of course.