Various mounts for Unifi G6 Instant Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of mounts (wall, floor, ceiling, shelf) that fit to the G6 Instant's moveable arm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
The excellent Unifi G6 Instant camera, out of the box, sits flat on a surface or can be fixed perpendicular to a wall with an included mount. My immediate need was to have a shelf stand so the camera could be tilted rather than sit flat on a shelf.
In making that stand it wasn't too hard to then make variants so that the camera could be mounted much more flexibly than with what is supplied out of the box.
All the mount and stand variants rely upon the moveable arm, supplied with the camera, being fitted at the back as the main point of attachment.
Included are:
Fixed wall mount, placing the camera parallel to the wall (left and right hand versions).
Fixed ceiling mount (for tilt down)
Fixed shelf or floor mount (for tilt up)
Fixed wall mount, placing the camera perpendicular to the wall.
Free standing shelf/table mount. Larger than the others to balance the weight of the camera.
All the mounts were printed in PETG with supports. The files provided are all in the default printing orientation (hooks upwards). The small circular mount should have a brim for printing vertically
All fixing holes were designed for 4 x 30mm (or #8) countersunk wood screws.
Models should be printed in the orientation of the files (screw holes down) - with supports (for the hooks) this ensures maximum strength. I printed them in PETG.
An additional set of 4 of the angled mounts has been provided that feature the camera hooks on the reverse side.