Not An Ordinary Chess Set (3D printable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not An Ordinary Chess Set that uses "locking" mechanism.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Not An Ordinary Chess Set
Is this chess set 3D printable under 256mm3?
Yes it is! The total size of this board (including the frame) is 240*240*25.
The board consists of 64 cubes (8*8), (each one has a base width and lenght 25mm, height is also 25mm).
What are the printing settings?
Layer height: I reccomend 0.20mm
Filament: PLA or PETG
Supports: The frame and individual "cubes" dont need any supports, however they are necassary when printing the figures at more than 45° overhang or mid air.
Rafts: Not needed, but can be useful for the chess figures.
You dont need to worry about the tolerances! -Each part is tolerance "minded".
Here is the correct orientation:
