Scanimation/Barrier-Grid Animation for #ColorMix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3-part kinetic barrier-grid animation: slide the grid over the printet image to make a color dog walk.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A scanimation (barrier-grid) animation toy. A printed image plate carries 4 interleaved frames of a walking dog. A sliding grid with 0.25 mm slits lies 0.25 mm above the plate. When you slide the grid sideways, each frame appears in turn and the dog seems to walk. The plate has two image fields: a color dog (top) and a black-and-white dog (bottom). The B/W field is the simple reference.
The four frames are color-coded lines (orange, green, yellow, blue), so each frame is recognizable. Orange, green and blue are virtual ColorMix extruders mixed from Cyan, Magenta and Yellow. Yellow, white and black are physical filaments.
Parts (3 print jobs)
Image plate (.3mf, ColorMix): 178.5 × 224 × 1.5 mm, 0.25 mm nozzle, 0.10 mm layers, 100 % infill. Base in white, image lines 0.375 mm wide.
Slider with grip (.3mf): 203.5 × 226 × 9.8 mm, 0.25 mm nozzle, 0.10 mm layers, 5 perimeters, 15 % infill, no supports. Grid: period 1.50 mm, slit 0.25 mm, bar 1.25 mm, thickness 0.40 mm. 45° chamfers on both guide edges.
Guide rail (.3mf): 197.7 × 232.5 × 7.4 mm, 0.4 mm nozzle (or 0.25 mm with 0.10 mm layers), 3 perimeters, 15 % gyroid, brim, no supports. A V-groove holds the slider in Y and Z and sets the 0.25 mm air gap. There are no end stops, so the slider can be pulled out.
E1 Cyan · E2 Magenta · E3 Yellow · E4 White · E5 Black. Virtual extruders (starting values, adjust to your filaments): Orange = Magenta 25 % + Yellow 75 %, Green = Cyan 50 % + Yellow 50 %, Blue = Cyan 75 % + Magenta 25 %. Open the 3MF in PrusaSlicer 2.9.6 or newer.
Assembly
Place the image plate in the rail pocket (color image at high Y).
Insert the slider from the side with the grip pointing right.
Slide to the right to advance to the next frame, to the left for the previous one.