Halloween Window Peeping Mummy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Something spooky and funny for Halloween
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
Window Halloween Decor creepy Mummy.
Important: use basic PLA as other filaments might not let the light through or even give a different light.
The goal here is not high quality, as the mummy needs to look rough, so use as large a layer height as possible for a quicker print.
For the base, use whatever you prefer, but I used a 0.6 mm nozzle. A 0.4 mm profile is also available.
You'll need an LED lamp, more commonly known as LED Lamp Kit 001. Nowadays you can buy them anywhere; just make sure they are 60 mm or less. New RGB LEDs are available, or you can print a diffuser if you wish to change the color.
Use a sticker, if you wish, to hold the LED in place. I didn't, and just placed the mummy on top.