SKÅDIS Thread and Bobbin Rack for Sewing - 12 Spools, 20 Bobbins - No Supports (SlideLock clips)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sewing thread rack for IKEA SKÅDIS: 12 spools on tilted pegs and 20 bobbins. Prints on its back, no supports.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A thread and bobbin rack for the IKEA SKÅDIS pegboard above the sewing machine: 12 thread spools on pegs tilted up 15 degrees (so nothing slides off) and 20 bobbins, two to a peg, matched to the threads above them.
• Spool pegs: 48 mm long, 6.2 mm at the root narrowing to 5 mm, for standard sewing thread spools and small cones (peg size is adjustable).
• Bobbin pegs: two class 15 bobbins each (20.5 mm across).
SLIDELOCK: HOOKS THAT PRINT WITHOUT SUPPORTS
The rack prints lying on its back, so every peg points up. The SKÅDIS hooks are two separate SlideLock clips that print lying flat (layers along the hook, the strongest way to print one). Nothing needs supports.
• The rack rests on the top of each clip, so the clips carry the weight in compression.
• Each clip's leg sits behind a 4.8 mm slit it can't pass through, and a spring finger clicks it in place.
ASSEMBLY (1 minute)
Push a clip's leg into the window at the bottom of a slot on the back, slide it up until it clicks. Same for the second clip.
2. Hang it on SKÅDIS: hooks into two slots of one row (80 mm apart), push in, let it drop.
PRINTING
• Rack on its back, clips flat, as in the files. No supports, no brim.
• PLA or PETG, 0.2 mm layers, 3 walls, 15% infill.
• Bambu Studio (H2C, one plate): 3 h 54 min, 112 g. The included 3MF is set up and sliced clean.
CUSTOMIZE (OpenSCAD Customizer)
Spool columns and rows, peg length and diameter, peg tilt and bobbin rows. Keep slidelock.scad next to the .scad file.
Part of a set of five SlideLock organizers: spice shelf, coffee capsule dispenser, self-watering herb planter, dog walk station and thread rack. The clips are the same for all of them.