Cursed Pumpkin Maze Box - Jack-o'-Lantern Puzzle Box with a Hidden Maze for Halloween Sweets (No Supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A jack-o'-lantern sweet box that won't open until you steer its lid through a maze hidden inside. The face only lines up
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A jack-o'-lantern that keeps its sweets to itself. The lid hides a maze cut into the pumpkin's neck, and it won't come off until you steer it all the way through: lift, turn, drop, turn back. Fill it with sweets and hand it to a trick-or-treater, or use it as a Halloween gift box.
HOW IT WORKS
• Two pins inside the lid ride in a maze cut all the way round the neck: 4 rows and 20 columns, a 30-move route and plenty of dead ends.
• The maze repeats on both sides, so the two pins always agree.
• The last move is sideways, so a closed box can be picked up by its lid without falling open.
• The face is split: eyes and nose on the lid, the grin on the base. They only line up when the lid is fully home.
PRINTING
• 2 parts, no supports. Both print upright; the lid's ceiling is a 45-degree cone and its pins have 45-degree undersides.
• 110 mm wide, 96 mm tall with the stem. The sweets space is 44 mm across.
• Bambu Studio: 5 h 28 and 178 g for both parts.
TIPS
• The entrance is the only slot that reaches the top of the neck, on two opposite sides.
• If the lid feels tight, raise the gap to 0.5 mm in the Customizer.
CUSTOMIZE (OpenSCAD)
The lid gap, and the face on or off.