Santa's Workshop - Hand-Crank Christmas Automaton
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn the crank: two elves hammer the anvil, Santa waves and the tree spins. Snap-fit, no supports, no glue.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Standard Digital File License
Turn the crank and the workshop comes alive. Two elves take turns hammering the anvil, Santa waves and the Christmas tree spins on a crown gear. It's a real automaton with snail cams, a crown gear and a scotch yoke. Everything snaps together: no glue, no supports.
Files
Multicolour STLs: 4 zips (elves, Santa and tree, props and fence, base and mechanism). Each part has its own folder with one STL per colour.
Single-colour STLs: the same 4 groups, one STL per part.
Bambu Studio 3MF: a 7-plate, 7-colour project, sliced and tested on the X2D.
README: full assembly in 11 steps.
Multicolour in PrusaSlicer / OrcaSlicer
Open one part folder and select all of its STLs.
Drag them in together. Answer Yes when the slicer asks to load them as one object with multiple parts.
Give each part its filament; the colour is in the file name. The parts share one origin, so they line up by themselves.
Single-extruder MMU or toolchanger users: the tall figures have the most colour changes. For a faster build, print the props in a single colour; the mechanism parts are single-colour already.
Print settings
0.4 mm nozzle, 0.16 mm layers, 2 perimeters, 15 % infill, PLA.
No supports; every overhang is 45 degrees or less.
The largest part (the base) is 183 x 123 x 49 mm, so any 250 mm-class bed works (MK4, Core One, XL, Bambu, Voron...).
Clearances: 0.15 mm on the shaft stack, 0.25 mm on the arm pins.
Assembly
Follow the README. In short: plaques onto the front, yoke inside, shaft in from the right through spacers, eccentric, crown gear and cams, then the clip, crank, deck, rods, washer, pinion, tree and star. Last come the dowels, the figures and the props. Turn the crank clockwise.
Printed one? Please share a Make. Merry Christmas!
NEW - Bambu Lab H3C: SANTAS_WORKSHOP_Automaton_multicolor_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.