1 / 3
MOONDROP MM3A Desktop Speaker Stand – 17° Tilt, Support-Free — zdjęcie 1
1 / 3

MOONDROP MM3A Desktop Speaker Stand – 17° Tilt, Support-Free

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

17° MOONDROP MM3A desk stand that aims the tweeters at ear level. Prints support-free; fits 10 mm silicone feet.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 17° tilt stand for MOONDROP MM3A desktop speakers. On a normal desk the tweeters fire at your chest; this stand angles them up to ear level (calculated for ears about 40 cm above the desk and 70 cm away).

PRINT SETTINGS: Print flat with the bottom face down (the face with the four recesses). No supports and no brim needed. PLA, 0.2 mm layers, 2–3 walls, 4 top / 3 bottom layers, 10% gyroid infill. Elephant foot compensation of about 0.15 mm keeps the foot recesses and the bottom text clean. Print two, one per speaker.

ASSEMBLY: Press a 10 mm clear silicone bumper into each bottom recess. https://a.co/d/0fc8mjCe

Tagi