1 / 2
Kitchenaid attachemnt to Kenwood bar connection adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter that allows you to use front attachments for Kitchenaid mixers on older Kenwood mixers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Adapter that allows you to use front attachments for Kitchenaid mixers on older Kenwood mixer.
An M4x20mm bolt and nut are needed for locking the Kitchenaid attachment in the adapter.
I recommend you print the shaft at about 30 - 35 degrees with supports as the part will be stronger.
I have tested the print only with PC filament and 5 perimeters - these are my recommended settings, seemed to work well in low speed applications and with not very high force applications.