Thickness Calibration & Light Transmission Test – 3D Printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three calibration models to test printable thickness, light transmission and resin printing accuracy.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
Thickness Calibration & Light Transmission Test
Overview
This collection contains three thickness calibration models designed to evaluate the relationship between material thickness, light transmission and 3D printing capabilities.
Originally developed for resin lithophane research, these models can also be used to evaluate thin-wall printability, dimensional accuracy and material behavior.
Included Models
1. Fine Thickness Test — 0.01 to 0.10 mm
10 thickness levels.
Increment: 0.01 mm.
Intended to investigate very thin features and the practical resolution limits of a printing process.
2. Medium Thickness Test — 0.1 to 1.0 mm
10 thickness levels.
Increment: 0.1 mm.
Useful for evaluating thin-wall printability and light transmission through thin sections.
3. Large Thickness Test — 1 to 10 mm
10 thickness levels.
Increment: 1 mm.
Useful for studying light attenuation across thicker sections and comparing different materials.
Applications
Light transmission: Compare how transmitted light changes with material thickness.
Lithophane development: Explore suitable thickness ranges for backlit 3D prints.
Printer capability testing: Determine which thin features can be reproduced successfully.
Dimensional accuracy: Compare printed thicknesses with the nominal CAD dimensions.
Material comparison: Evaluate different resins, colors and printing settings.
Exposure testing: Investigate the effects of exposure settings on thin-feature reproduction.
Recommended Testing Procedure
Print the calibration models using your chosen material and settings.
Clean and post-cure the parts according to the material manufacturer's recommendations.
Inspect each thickness level for missing features, deformation or printing defects.
Measure the actual thicknesses using suitable measuring equipment.
For light transmission testing, place a consistent light source behind the specimen.
Compare the transmitted light between thickness levels.
Record the results for future reference.
Important Notes
The dimensions shown on the models are nominal CAD dimensions. Actual printed thicknesses may vary depending on printer resolution, exposure, material properties, orientation and post-processing.
A successful print does not necessarily mean the nominal thickness has been reproduced accurately.
For meaningful optical comparisons, use the same lighting conditions, material preparation and measurement procedure.
Development
These models were created as part of an experimental project focused on resin 3D printing, lithophanes and light transmission.
Feedback, measured results and photographs of printed specimens are welcome.
