MIRAGE - Mirror Illusion Christmas Pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print a snowman, the mirror shows a tree. 5 mirror illusions, 11-22 min each, 1 or 2 colours, plus a customizer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Standard Digital File License
Put a snowman in front of a mirror. The mirror sees a Christmas tree. Five ambiguous objects after Kokichi Sugihara's ambiguous cylinders. Each one is an open ring with a wavy top edge: from about 45 degrees above it draws one shape, and in a mirror behind it the same edge draws another. Snowman → tree, bauble → gift, heart → bell, circle → square, plus an arrow that still points right after you turn it around.
Files
STL_single_colour: one STL per piece. This is all you need; the illusion works in one colour.
STL_two_colour:
<piece>_body_white.stl+<piece>_rim_<colour>.stlper piece.mirage.scad: OpenSCAD customizer, any two of 14 shapes.
Bambu Studio 3MFs: 1 colour, 2 colour and 0.2 mm nozzle versions, sliced and tested on the X2D.
README: how to look at it, settings, customizer guide.
Two colours in PrusaSlicer / OrcaSlicer
Select the body and rim STL of one piece and drag them in together.
Answer Yes when asked to load them as one object with multiple parts.
Give the rim its colour. The parts share one origin, so they line up by themselves.
The rim is the top 2.4 mm of the wall and follows the wavy edge, so it needs a real second filament (MMU, toolchanger, AMS). A single colour change at one height won't make the band.
Print settings
PLA, 0.2 mm layers, 4 perimeters with a 0.4 nozzle (the wall is 1.6 mm), no infill, no supports.
0.2 mm nozzle: 0.12 mm layers and 7 perimeters for the crispest edge.
About 11 to 22 minutes per piece and 42 g for the whole set in one colour.
Each piece is 61 mm wide and 37 to 94 mm deep, so any bed works.
How to see it
Stand a mirror upright and put the piece 1-2 cm in front of it, long side towards you. Look down at about 45 degrees with one eye closed, or through your phone camera, from a little further away. For the arrow, look, turn it 180 degrees on the spot and look again.
Printed one? Please share a Make. Merry Christmas!
NEW - Bambu Lab H3C: MIRAGE_Christmas_Pack_2colour_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.