chimera+ fan adapter 30mm -> 5015 blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey, I am currently upgrading my printer to a chimera+. I don't like the stock 30mm fan, so I want to replace it. I…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hey,
I am currently upgrading my printer to a chimera+. I don't like the stock 30mm fan, so I want to replace it. I designed 2 adaptors to use ether a 40mm fan (see my other designs) or a 5015 blower.
The mount replaces the original 30mm fan, and uses the same screws as the 30mm fan.
The 5015 blower is much more powerful, and if you let it run slower, you have less noise but equal cooling performance.
I used a titan blower which is about 7€ from amazon.de. https://www.titan-cd.com/en/product/DC-System-Blower-Cooling-Fan-50mm-x-15mm-Series/TFD-B5015xxxx.html
I also used a Sunon blower, which is slightly wider - there are two different STL files, one for each. I updated the design regarding the diameter of the screw-holes at the base to make them fit better (thanks to user AwesomeOne).
Let me know what you think or post a make, I hope you find it useful :-)
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
20
Notes:
You have to rotate it to minimize support. Print it standing, like in the photo. Support only needed for 3 holes, very easy to clean away. Use some brim.
Category: 3D Printer Parts