Reinforcement for Dell Desktop Dock for the Latitude 12 Rugged Tablet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I work with people that must take rugged Dell tablets into the field and we were running into a problem with the docks…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- BSD License
I work with people that must take rugged Dell tablets into the field and we were running into a problem with the docks failing. Come to find out they are overly sensitive to the angle the tablet docks at. No big deal right the metal rack will hold them right.... Not so much. The rear metal removable stand is incredibly soft. We have had to straighten several this week alone.
I have created a 70ish degree stand that sandwiches the back support plate, forces the proper angle, and stiffens the soft metal stand.
Print Settings
Printer:
Creality CR6-SE
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
25%
Filament:
Misc PLA
Black
Notes:
Supports only for faceplate for the screw head insert. I was able to print without the support just didn't look great. Because you can clearly see what us under the washer and screw head.
Post-Printing
Parts Required
4 Each:
* 3mm Heat set thread insert * 3mm x 8ish mm screw * 3mm washer
All parts easily gotten from your favorite online mass market supplier... Had all on hand.
Assembly
Heat set 4x 3mm heat set threaded inserts
The small dimple in the back of the cover plate is the top. Not perfectly symmetric so a guide was added.
How I Designed This
TinkerCad, protractor, and ruler
Category: Tablet