Creality CR6-SE Filament Guide Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple design for a clip-on filament guide body for the Creality CR6-SE. Only my second design and am new to 3D…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A simple design for a clip-on filament guide body for the Creality CR6-SE. Only my second design and am new to 3D printing. This design is heavily influenced by (not a remix of) two (2) designs:
- CR6-SE Top & bottom mount filament guides by agent9
- Creality CR6-SE Filament Wheel Guide Mount by jeremiahburt23
Also as stated in jeremiahburt23's description this too depends on:
- Ender 3 Filament Roller Guide by Holspeed
- 2x Spacers
- 1x Ring
The only difference between the two (2) designs is I chose to try rounding edges. Personally, my test print of the square edges looked better but I think I was battling some other things (speed and temp) for the rounded version. I had switched settings just before printing and I think it went to defaults, not my tweaked settings.
Parts needed:
- 1x #8 machine screw
- 1x #8 nut
- 2x #8 washers (optional)
- 1x 608 bearing (what I had laying around and what the bag says. Spare parts from another project)
Print Settings
Printer:
Creality CR6-SE
Rafts:
No
Supports:
Yes
Resolution:
0.16/0.28
Infill:
25%
Filament:
Mika3d PLA
Blue
Notes:
Using a Creality CR6-SE printer (not available in the drop-down list of printers)
Using Cura I selected "Touching Buildplate" for the supports.My final version I printed at 0.16 but I liked the look of the 0.28 better.
Category: 3D Printer Parts