1 / 7
Geometric Lattice Bauble Set of 3 - Faberge, Spiral, Gem — zdjęcie 1
1 / 7

Geometric Lattice Bauble Set of 3 - Faberge, Spiral, Gem

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three openwork Christmas baubles to hang on the tree. They are free.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Three openwork Christmas baubles to hang on the tree. They are free. Each one is 66 mm wide and about 110 mm tall with its crown cap and loop.

WHAT YOU GET: Faberge egg: two diamond-lattice halves that snap together on a belt (bead and groove), gold jewels on every lattice node and round the belt, crown cap with a loop and drop finial. Spiral: 12 ribbons in alternating white and red, each with a raised centre rib, twisting 200 degrees on a constant 50 degree helix, with a gold core rod and faceted beads. Faceted gem: 10-sided shell with triangle and diamond windows and a gold gem on a rod inside. Every bauble has a gold 8-point crown cap, a fluted collar and a hanging loop.

COLOURS: The 3MF uses 4 colours (red, white, green, gold) for multi-material printers. Each bauble also prints in one colour. NO SUPPORTS: the shape has no face flatter than 45 degrees, and every window has a pointed top.

PRINT SETTINGS: Spiral and gem print in one piece, standing on their finial. Egg: top half rim down, bottom half standing on its finial; snap the top over the collar. 0.2 mm layers, 2-3 perimeters, 15 percent infill. A brim helps the spiral and gem. Thread a ribbon through the loop. Files: one STL per part, a combined STL and a 4-colour 3MF. NOTE: Not yet print-tested by me - checked for manifold geometry and fit in Blender. Designed with Python scripts in Blender with the help of an AI assistant; no third-party meshes.

Tagi