1 / 7
Stained-Glass Christmas Suncatcher Set of 6 — zdjęcie 1
1 / 7

Stained-Glass Christmas Suncatcher Set of 6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Six stained-glass suncatchers to hang in a window for Christmas. They are free.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Six stained-glass suncatchers to hang in a window for Christmas. They are free. Each one is a flat ornament about 78 x 88 mm and 2.4 mm thick. A dark lead frame holds coloured glass cells, like a real leaded window. Print the glass in translucent PLA and the cells glow when the light comes through.

WHAT YOU GET: Star of Bethlehem: 16 ray panes in gold and clear, a long lower ray, a gold centre jewel, a blue night sky, a halo of 24 small panes and lead spikes past the rim. Christmas tree: three tiers with curved hems, gold garlands with red baubles, a star on top and a red pot with a gold band. Bauble: curved bands and meridian lines, a gold and red zig-zag belt, clear frost stripes and a fluted gold cap. Bell: lead lines that follow the flared shape, a clear highlight panel, red bands, a red clapper and a red bow. Candle: a red candle with clear wax drips and a gold flame in a 12-ray sunburst, with holly leaves and three berries on a gold dish. Snowflake: a six-arm faceted clear snowflake with a gold hub on a blue sky. Every ornament has a hanging loop.

COLOURS: The 3MF has 6 colours (lead, red, green, gold, blue and clear). The glass cells are separate colour bodies that sit flush in the lead frame. NO SUPPORTS: every ornament prints flat in one go.

PRINT SETTINGS: Print flat, 0.2 mm layers (0.12 mm looks even better), 100 percent infill or 3 perimeters, so the 2.4 mm glass stays clear. Set the lead colour as the base and assign each glass body its colour. Thread a ribbon or fishing line through the loop and hang it on a window that gets sun. Files: one STL per colour body for each ornament, a combined STL and a 6-colour 3MF. NOTE: Not yet print-tested by me - checked for manifold geometry and fit in Blender. Designed with Python scripts in Blender with the help of an AI assistant; no third-party meshes.

Tagi