1 / 7
Christmas Mini Village Ornament Set of 6 - Chapel, Houses — zdjęcie 1
1 / 7

Christmas Mini Village Ornament Set of 6 - Chapel, Houses

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little snowy Christmas village to hang on the tree, free: six house ornaments.

Ocena
0 / 5
Polubienia
5
Pobrania
8
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A little snowy Christmas village to hang on the tree, free. There are six house ornaments, each about 55 to 64 mm tall with its gold hanging loop.

WHAT YOU GET: Cottage: gable-front cottage with an arched plank door and wreath, cross-mullion windows, shuttered side windows and a brick chimney with a snow cap. Chapel: nave with buttresses and pointed stained-glass windows, a rose window, and a front tower with a pointed door, louvred belfry and octagonal spire. Bakery: brick shop with a chamfered bay window, a BAKERY sign and a striped awning. Half-timbered house: jettied upper floor with X and K braces, flower boxes and a wreath on the door. Windmill: tapered octagonal tower with a pierced gallery and lattice sails that slide onto a diamond peg. Town hall: two wings with a central tower, an inlaid clock face, arched door with steps and a pyramid roof. Every roof has stepped tiles and a snow cap. Windows are inlaid with gold glass so they look lit.

COLOURS: The 3MF uses 6 colours (cream, red, green, white, gold, brown). The panes sit 0.4 mm below the frames, so the windows still show if you print in one colour. NO SUPPORTS: each house prints upright in one piece.

PRINT SETTINGS: Houses upright, 0.12-0.16 mm layers for the window detail, 2 perimeters, 15 percent infill. Sails flat, 0.2 mm layers. Slide the sails onto the diamond peg on the windmill cap and add a drop of glue. Thread a ribbon or ornament hook through the loop. Files: one STL per colour part, a combined STL and a 6-colour 3MF. NOTE: Not yet print-tested by me - checked for manifold geometry and overlaps between the colour parts in Blender. Designed with Python scripts in Blender with the help of an AI assistant; no third-party meshes.

Tagi