Sticker Vending Machine Coin Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sticker vending machine mechanism that runs on one custom 3D-printed token.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This remix is based on the original open-source design and allows others to make their own modifications and use it in different projects.
As with the original design, keep in mind that 3D-printed parts have strength limitations, so the mechanism should be tested before using it in a finished project.
I want to thank moviusmakes for inspiring me to create my own Sticker Vending Machine.
Hardware:
5 x M2 threaded heat inserts.
4 x M2*4mm hex screws.
1 x M2*10mm hex screw.
Print Settings:
PLA
0.2mm Layer Height
2 Walls
15% Infill
Assembly:
Add heat inserts
Place inner pieces in their place.
Put front piece on top, introduce handle in its place and tighten four M2x4mm screws,
Turn the mehanism aroiund, place the wheel on top of the handle bar, and tighten the M2x10mm screw.
Done!
