1 / 5
Spirit Island Scenario Markers, Sculpted Figures (Multicolour) — zdjęcie 1
1 / 5

Spirit Island Scenario Markers, Sculpted Figures (Multicolour)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sculpted multicolour Spirit Island scenario markers, printed complete with no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

Small sculpted markers for six Spirit Island scenarios and the Habsburg Livestock Colony adversary, each printed complete and already coloured. No supports, no glue, no painting. Every marker stands on the same Ø25 mm base with a twisted-rope rim.

The printed markers
  • Ward the Shores: a shield planted in a surf mound. 24 markers, sand and dark blue.

  • Rituals of the Destroying Flame: a ritual fire in a brazier. 20 markers, grey and orange.

  • Guard the Isle's Heart: a heart crystal on a craggy peak. 6 markers, grey-green and red.

  • The Great River: a three-tier rock cascade, water falling into a pool, foam and moss. 8 markers, grey, blue, white and green.

  • Powers Long Forgotten: a standing stone with a purple eye. 17 decoys plus one each of the values 1 to 8.

  • Despicable Theft: a hooded thief with a belt, dagger and loot sack. 12 blanks plus 3 × 1, 2 × 2 and 1 × 3.

  • Habsburg Livestock Colony damage (level 4 adversary): a flat 2 mm disc a town or city stands on, its value shown four times round the edge. 4 × 2 and 4 × 3.

Ward, flame and heart

Hidden values

Powers Long Forgotten and Despicable Theft hide their value: every marker of the scenario looks the same from above, and the number is a flush inlay under the base. Lift a marker to reveal it. Each set comes on one plate in the same filaments, so nothing but the underside gives a value away.

Stones, thief, river and damage discs

Files

One 3MF per scenario, with the full count for a 6-player game laid out and every colour part already assigned. Open it in Bambu Studio or OrcaSlicer, load the filaments in the order shown, and slice.

  • si_relief_ward.3mf: 24 shields (delete 8 for 4 players). Sand, navy. About 60 g, 4.2 h.

  • si_relief_flame.3mf: 20 fires. Grey, orange. About 48 g, 4 h.

  • si_relief_heart.3mf: 6 crystals. Sage, red. About 15 g, 1.3 h.

  • si_relief_river.3mf: 8 cascades. Grey, blue, white, green. About 50 g, 3.9 h.

  • si_relief_powers.3mf: 17 decoys and the values 1 to 8. Grey, purple. About 51 g, 4 h.

  • si_relief_theft.3mf: 12 blanks, 3 × 1, 2 × 2, 1 × 3. Grey, black, tan. About 73 g, 5.5 h.

  • si_relief_damage.3mf: 4 × 2, 4 × 3. Grey, red. About 10 g, 0.8 h.

To print fewer, delete pieces on the plate before slicing. To print a single marker, keep one and delete the rest.

On the table

Print settings

  • 0.16 mm layers, 2 walls, 15 % infill (times above are sliced at 0.16 mm for a 4-colour printer)

  • No supports, no brim, ironing off: every face leans 45° or less

  • Prime tower on; print a whole plate at once, as the colour changes are per layer, not per marker

  • PLA (PETG works too)

  • The thinnest features are the flame tips (about 1 mm): slow outer walls help

  • Hidden-value plates start with the flush number under the base, so the first three layers are two-colour: keep the bed clean

Close up

Tagi