Squareness Calibrator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Qidi Tech X-Plus Printer was not printing square (no 90º angles on corners). The fix turned out to be easy (twist…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
My Qidi Tech X-Plus Printer was not printing square (no 90º angles on corners). The fix turned out to be easy (twist the whole X-axis carriage along the Z-axis until one or more gear teeth are skipped on the belt). What was difficult was verifying the fix.
I created this object to be printed two times, with one overlaid and on the other and rotated 90º to check squareness.
TIP: Don't throw both prints away after verifying! Save one now, and print one later the next time you need to check squareness (just-learned lesson).
Print Settings
Printer:
Qidi Tech X-Plus
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament:
3D Solutech PLA
Real Blue
Category: 3D Printing