10 inch tray for TP-Link Omada ES210x-M2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a new switch to my network and needed a tray for a 10 inch rack .
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this great design by Russell Dame but the print stopped at about 80% (filament got stuck...). Nevertheless, it was good enough to mount the switch on the rack. Although the switch was constrained by friction, it still moved when inserting/removing the Ethernet cables. Further, I was not very comfortable that the side walls were blocking most of the cooling holes on the sides of the switch.
So, I made these (minor) modifications to better suit my needs.
Both the failed print and the final one in the pictures were made in ASA, 0.2mm layer and no supports.