12V Dummy Load / Volts & Amps Meter / 12V Power Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a separate meter and 12 cigar lighter socket I was using as a battery/solar panel tester and dummy load. So I…
- Ocena
- 3 / 5
- Polubienia
- 10
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I had a separate meter and 12 cigar lighter socket I was using as a battery/solar panel tester and dummy load. So I decided to combine them.
This thing has 44 snapping nubs arranged in two rows around the perimeter. I reinforced the connecting shell and lid corners, and reduced the depth of the snapping nubs after the first one cracked when being snapped in place. After reinforcement the new lid snapped in place with a firm knock. It is NEVAR coming off without breaking the case.
Meter: https://www.amazon.com/dp/B075V2WTT8/ref=cm_sw_r_tw_dp_U_x_qoofDb4YH0BXX
12 Socket: https://www.amazon.com/dp/B00B1XD7SW/ref=cm_sw_r_tw_dp_U_x_cqofDbXP40PEH
Cables: https://www.amazon.com/dp/B07GZBPDRB/ref=cm_sw_r_tw_dp_U_x_1fofDbVTE26ZK
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9uzEluMdV0M
Print Settings
Printer:
Qidi X-Plus
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
15%
Filament:
unknown PLA
black
Category: 3D Printing