Mini metered switch box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to try printing with TPU to make the switch boxes more heat resistant and more playful. There's zero…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I decided to try printing with TPU to make the switch boxes more heat resistant and more playful. There's zero tolerance between the lid and the bottom supporting lip, so it slips on easily and stays put. If printed with something rigid, a tolerance of at least 0.1mm on all four lip edges would be needed.
Switches: https://www.amazon.com/dp/B00A0BAYR8/ref=cm_sw_r_tw_dp_U_x_beofDbXMP4DV9
Cables: https://www.amazon.com/dp/B07GZBPDRB/ref=cm_sw_r_tw_dp_U_x_1fofDbVTE26ZK
Meter: (unknown)
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/l8CkwZ4Rssw
Category: 3D Printing