1 / 2
Bean Wigwam Toppers - Hubs That Hold Canes Together for Bean Wigwams, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Bean Wigwam Toppers - Hubs That Hold Canes Together for Bean Wigwams, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hubs that hold the tops of bamboo canes together for bean and sweet pea wigwams. No string needed.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hubs that hold the tops of bamboo canes together for a bean, pea or sweet pea wigwam, or a climbing frame for clematis and nasturtiums: push the canes up into the angled sockets and the wigwam stands by itself, no string needed. One six-cane and one four-cane topper per plate; set the cane size and angle in the Customizer (the default fits 8-12 mm canes). PETG or ASA for outdoors.

DETAILS

• 13 mm sockets, 40 mm deep, at 20 degrees.

• Prints with no supports: each topper prints upside down on its flat top, with the sockets leaning out at 20 degrees.

• Bambu Studio: 2 h 36, 57 g for the set.

CUSTOMIZE (OpenSCAD)

Socket diameter, depth and cane angle.

Tagi