Mamiya 645 Motor Drive Crank Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of an existing adapter to make it easier to use
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slight improvement on the original model which adds two features:
Knurling. The original required a tool to remove, which broke the first time I tried it. So I've added knurling that makes removal by hand easier.
A circular recess, like on the original plate. This is because the mating plate on the motor drive has a circular part to the interface. This change improves locking depth.
Honestly I'd like to add a metal interface plate to this too so I'll redesign this myself entirely at some point, but if you want something fully 3D printable then this is a good option. Because the plastic will deform from the hook mechanism you might still need to pry this off with a screwdriver if it's wedged on there.
I printed this in PETG with 100% infill because it's subject to a fair amount of rotational force from the motor drive. Prints without supports if you set your bridging right, and I'd recommend printing it knurled-side down.