1 / 4
Elna Friction Wheel — zdjęcie 1
1 / 4

Elna Friction Wheel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement friction wheel for the Elna SU 64C and others

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I made this part to replace the friction wheel in an Elna SU 64C. Although I have not directly verified it, I expect it will also work for other similar machines such as the SP 31/33, ST 41/43, as well as the SU 62/64.

You will need three o-rings, size 26x30x2mm. You will also need two 4x10x4mm bearings.

I modeled the hole for the bearings slightly oversize. On my printer it results in an easy press fit. You may need to play with the X/Y compensation settings in the slicer to dial it in for your particular printer.

I don't recommend ABS or ASA unless it is fiber filled. There are some challenging overhangs which want to curl up, and that may cause the o-rings to seat at different depths. I printed mine out of Atomic PETG-CF without supports. PLA will also work fine.

There is at least one video I know of that shows how to replace this part, but it is on a freearm machine. On the flatbead version it is more difficult. I was able to do it by only removing the hand wheel and power inlet, but it took some effort.