1 / 2
Crystal Snowflake Ornaments (2 Free): Two Colour, One Filament Change, No Supports — zdjęcie 1
1 / 2

Crystal Snowflake Ornaments (2 Free): Two Colour, One Filament Change, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two crystal snowflake ornaments. Print in two colours with one filament change on any printer. Flat, no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Two crystal snowflakes from a set of twelve. They have raised ridges, so you can print them in two colours with a single filament change at layer 13 (2.6 mm), on any printer. They're flat, need no supports, and have a built-in hanging ring.

What's included

  • Snowflakes 02 and 09, 80 mm tip to tip, 3.2 mm thick, with a 5 mm hanging hole

  • Split base and ridge files for multi-material printers

Print settings

  • Layer height: 0.2 mm, first layer 0.2 mm

  • Walls: 2

  • Top / bottom: 3 / 3

  • Infill: 100%

  • Supports: none

  • Brim: none (mouse ears if a tip lifts)

  • Material: PLA

  • Two colours: colour change at layer 13 (2.6 mm)

  • Multi-material: load the base and ridges files together as one object with two parts

If you like them, the full pack of 12 plus blank name-plaque versions is on Cults3D: Crystal Snowflake Ornaments, 12-pack. Selling prints at markets? There's a commercial-licence version too.

Designed by WouldCraft using a procedural generator written with AI assistance. Each design was checked by hand.

Tagi