Zed Mini Camera Tripod Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tripod mounting bracket for the StereoLabs Zed Mini Camera
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick & easy bracket to attach your ZedMini to a tripod. Remixed the base from another model, but the portion that mounts the ZedMini is all from the ZedMini specification sheet. Fits great.
I didn't have a nut so I remixed this one, which I printed at .12mm layer height with my .4mm nozzle and it works well. I modified it slightly here for a better fit with this part.
For printing the bracket, I used 20% grid infill, .2mm layer height, only 2 wall loops, supports enabled, and printed it flat on its back. If you think you need more strength, add more infill & wall loops.
Two version here- one with a hole in the back for ventilation, and one without; otherwise they are identical.
It's designed to work with 4x M2x4mm bolts, but you could definitely get away with just 2 if that's all you had. These will slot through the holes on top & bottom and right into the mounting holes on the ZedMini.