Prusatones Vinyl Player - Motor Visualizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A retro record player with rotating vinyl as a motor rotation visualizer.
- Ocena
- 0 / 5
- Polubienia
- 63
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A retro record player with rotating vinyl as a motor rotation visualizer. This model consists of 4 parts, all of them can be printed without supports by orienting faces to the bed.
You will need a 8x5 mm magnet or two 8x3 mm magnets.
On my printer (Elegoo Neptune 2) it cannot be positioned on a nice visible spot sadly.
→PRINT TIPS:
>The vinyl can be printed in two colors with normal printers by adding a “pause at height” script. If you slice it with 0.12 layer height and 0.2 initial layer height you can pause it at layer 13 and swap your filament.
>If you print with concentric Top/Bottom layers you will improve the look of the vinyl plate.
>The recessed bottom hole is intentionally shallow and if you print with the previous tip it will mark where to place and glue the magnets.
>Print with 3 perimeters as the walls of the record player are 1.2 mm thick.
>Face orientation when printing:
→ Vinyl: As per .stl file.
→ RecordPlayer: Select the top face so that the thin walls point up.
→ Needle: Select top face to orient with the bed so the cylinder points up.
→ Horn: Widest part of horn face down on the bed.