eZ v4 Direct Drive for ZYLTech Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improvement to my previous direct drive extruder for the ZYLTech Gear and probably the Two Trees BLU…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is an improvement to my previous direct drive extruder for the ZYLTech Gear and probably the Two Trees BLU series. (The factory mount of the printer is posted as well, so you can compare it to your printer.)
This mount will work with the factory hotend or upgrade to 5015 blower fans. The other main feature is a mount for a new hotend, like the Dragon, Mosquito or any other v6 round hotend. Also included is a 30mm fan duct or 40mm fan duct for the hot end.
Finally, with a end-stop switch you can add the FreeZ ABL, which makes leveling the bed easier. https://www.thingiverse.com/thing:4652385
Post-Printing
Some supplies may be needed...
2x 4mmx25mm screws & nuts
3x 3mmx16mm screws & nuts
Your wiring will probably look better than mine. There are several zip tie spots on the mount to help keep things nice and tidy.
How I Designed This
The whole thing was designed in Tinkercad.
Category: 3D Printer Parts